Sprinkler discharge damage repair in Grand Rapids
A scissor lift, a forklift mast or a pallet on a high rack can snap a sprinkler head or a branch line, and the system keeps discharging until the water is shut off. That leaves two problems at once: water damage across the floor below, and a fire protection system that is out of service. Grand Rapids Construction coordinates the licensed fire protection contractor who repairs and restores the system, and handles the building repairs around it.

- MI Builders License 262100253
- Commercial and industrial work only
- Work planned around operating facilities
- Kent, Barry and Muskegon counties
A lift hit a sprinkler head and flooded the warehouse. What do we do now?
A licensed fire protection contractor repairs the broken sprinkler and puts the system back in service, while a general contractor coordinates that work and repairs the water and impact damage below. Grand Rapids Construction coordinates both for commercial and industrial buildings in Grand Rapids and West Michigan. Once people are safe and your fire protection monitoring company has been called, phone 616-323-0292.
Right now, in this order
Get people away from the discharge and out of standing water near electrical equipment. Call 911 if anyone is hurt or there is any sign of fire.
Call your fire protection monitoring company and follow your fire protection procedure. Only a person trained on your system should close the control valve.
Tell the fire department and your insurer the system is impaired, as your procedure and policy require. The building may need a fire watch while it is out of service; the fire marshal or your insurer decides.
Leave the lift or equipment that broke the pipe where it is until the water is off. Photograph it, the broken head or fitting, and the water damage.
Call a water mitigation company to remove the water, then call us at 616-323-0292.
What we repair
- Broken sprinkler heads, branch lines and fittings, through a licensed fire protection contractor
- Returning the system to service and any inspection that follows
- Flow switch and alarm panel checks through the alarm contractor
- Ceilings, insulation and drywall soaked by the discharge
- Flooring and wall finishes below the break
- Walls, ductwork and ceilings hit by the lift or load
- Head guards and clearance changes where equipment works close to sprinklers
- Photos and a written repair scope for the claim
Where our part stops. Sprinkler and fire alarm repairs are done by licensed fire protection and alarm contractors under our coordination; we do not do that work ourselves. The fire marshal or your insurer decides whether a fire watch is needed, and a water mitigation company dries the building.
While the system is out of service
An impaired sprinkler system means the building is not protected the way the fire code and your insurer expect. The fire marshal or your insurer may require a fire watch until it is restored, and your insurer may have its own impairment procedure for you to follow. Ask them, and keep what they tell you in writing.
That is why the fire protection repair comes first. The licensed fire protection contractor replaces the broken head or pipe, refills the system and checks it, and the monitoring company is told when it is back in service. Some repairs need a permit and an inspection before the work is accepted.
Two repairs in the right order
After the fire protection contractor, the alarm contractor checks and resets flow switches and valve supervisory devices at the panel. The mitigation company dries the space. Then we rebuild ceilings, walls and finishes, and repair anything the lift or load hit on the way up.
Ceiling work near sprinklers has to keep heads at the right position and clearance. Replacement heads must match the type and temperature rating the system was designed for, which is the fire protection contractor's call, not ours.
Why it broke, and what to change
Most of these breaks come down to clearance: a lift working close to heads, storage stacked too high, or new equipment with a taller mast. While the system is being repaired is a good time to look at head guards, moving a branch line, or changing where lifts work. Changes to storage height or layout can affect the sprinkler design, so they are reviewed before anything moves.
At Genuine Parts Company's Grand Rapids distribution center, the fire suppression system was reconfigured after an accident at the facility, with sprinkler modifications and permit and inspection coordination, to restore compliance while operations continued. At Motus Integrated Technologies in Holland, our crew supported draft curtain and fire suppression work in a production facility.
Documenting a discharge
Photograph the broken head or fitting, the equipment that hit it, and how far the water spread. The alarm panel may record when the flow started and stopped. Keep the broken head, since your insurer may want to see it, and get the fire protection contractor's written report on what was repaired. Our scope covers the building damage, kept separate from the system repair.
What helps us help you
- Where the break is and what hit it
- When the water was shut off, and by whom
- Your fire protection contractor's name, if you have one
- Any instructions from the fire marshal or your insurer about a fire watch
- Photos of the broken head or pipe and the area below
- Your claim number, if one is open
Part of our emergency repairs work.
Related projects
Work for named West Michigan clients. All projects and client reviews.

Fire suppression reconfigured after facility damage at a Genuine Parts distribution center
After an accident at the Grand Rapids distribution facility, the fire suppression system was reconfigured to restore compliance while operations continued.
Restroom renovations and fire protection support for Motus Integrated Technologies
Restroom renovations at a high-volume production facility, with support on draft curtain and fire suppression work.
"Grand Rapids Construction completed bathroom renovations for Motus Integrated Technologies and provided valuable support with draft curtain and fire suppression work."
Questions about sprinkler discharge damage
Do we need a fire watch?
Possibly. When a sprinkler system is out of service, the fire marshal or your insurer may require one until it is restored. Ask them directly and follow what they tell you.
Who is allowed to repair the sprinkler?
A licensed fire protection contractor. We coordinate them with the alarm contractor and the building repairs, so the system goes back in service and the space is rebuilt in the right order.
Can our maintenance staff just swap the broken head?
No. Heads have specific types, temperature ratings and positions, and the repair has to be done and documented by a licensed fire protection contractor.
Why does the alarm panel still show trouble?
Flow switches and valve supervisory devices report to the panel. After the repair, the alarm contractor resets and checks them. Until then the monitoring company may still show the system as impaired.
How do we stop it happening again?
Head guards, moving a branch line, or changing where lifts work and how high goods are stored can remove the cause. Storage changes can affect the sprinkler design, so they are reviewed first.
Who pays for the water damage?
That depends on your policy and on whose equipment broke the pipe. We provide photos, the fire protection contractor's report and a written repair scope; the insurers decide.
Other emergency repairs
Part of emergency repairs. All services.
- Forklift damage repairWalls, columns, doors and piping hit inside a plant or warehouse
- Commercial water damage repairBurst pipes and supply lines: rebuilt once the space is dried
- Draft curtainsHeat containment for sprinklers in warehouses and high-bay buildings
- Emergency repairsVehicle impacts, roof leaks, water and storm damage
Damage to a commercial building?
For immediate danger call 911 first. For building damage, phone us; do not rely on a web form. Call 616-323-0292 or email info@grandrapidsconstruction.com.