Commercial fire damage repair and rebuilding in Grand Rapids
When the fire is out, the building is left with burned materials, water from the hoses, smoke and soot, broken windows and openings, and often a fire protection system that is out of service. Grand Rapids Construction coordinates the board-up, removes damaged materials, works with a structural engineer where the structure was affected, and rebuilds the space through permits and inspections, while a restoration company handles smoke and soot cleaning.

- MI Builders License 262100253
- Commercial and industrial work only
- Work planned around operating facilities
- Kent, Barry and Muskegon counties
We had a fire in our commercial building. Who rebuilds it?
After the fire department releases the building, a restoration company cleans smoke and soot while a commercial general contractor secures, demolishes and rebuilds the damaged areas, with a licensed structural engineer for burned structure. Grand Rapids Construction handles that rebuild for commercial and industrial buildings in Grand Rapids and West Michigan, including permits and inspections. Once everyone is safe and the fire department allows access, call 616-323-0292.
Right now, in this order
Do not go back into the building until the fire department releases it. Ask who is in charge of the scene and when you may enter.
Leave gas and power off until the utility and a licensed electrician say they can be restored. Do not reset breakers or relight equipment.
Call your insurance agent to open a claim, and ask what they need to see before anything is removed.
Call your fire protection monitoring company if the sprinkler or alarm system operated or was damaged.
Call us at 616-323-0292 to secure the openings and plan the next steps.
What we repair
- Board-up and temporary fencing coordination
- Demolition and removal of burned and wet materials
- Structural repairs designed by a licensed engineer
- Roof, wall and envelope reconstruction
- Framing, drywall, ceilings and finishes
- Electrical, plumbing and HVAC through licensed trades
- Fire sprinkler and alarm restoration through licensed contractors
- Permits, inspections and final sign-off
Where our part stops. We do not clean smoke and soot or restore contents: a restoration company does. A licensed structural engineer decides on fire-damaged structure, licensed contractors and the utility restore the fire protection, electrical and gas systems, and your insurer decides coverage.
Who does what after a fire
The fire department decides when the building can be entered. A fire investigator, from the department or your insurer, may need to see the scene before anything is removed. A restoration company cleans smoke and soot from the surfaces and contents that can be saved and treats the odor. We secure the building, remove what cannot be saved, repair the structure with an engineer, and rebuild.
Those jobs overlap, so we keep one written scope that says who handles each room and each surface. That avoids paying for a wall to be cleaned and then demolished, or a ceiling that everyone thought someone else was taking out.
Securing the building
A fire leaves broken windows, forced doors and sometimes holes cut in the roof by firefighters to vent smoke. Those openings are boarded or covered and the roof dried-in, temporary fencing goes up where people could walk in, and the undamaged parts of the building are protected from weather and trespass. Utilities stay off until the utility and licensed trades say otherwise.
What has to come out
Burned framing, insulation and ceilings come out, and so does drywall soaked by firefighting water. Smoke and hot gases travel through ceiling spaces and ductwork, so damage often reaches well past the room where the fire started. Demolition starts only after the investigator and your insurer are finished with the scene, and each step is photographed.
Steel that was exposed to high heat, charred wood members, cracked masonry and a damaged roof deck are evaluated by a licensed structural engineer, who defines the repair before it is priced and built.
Rebuilding to today's code
The rebuild needs a permit, and the building department may require the rebuilt areas to meet current code for fire separations, exits and accessibility. That can mean more than putting back what was there, so we raise it early for your insurer. The fire sprinkler and alarm systems are restored by licensed contractors and inspected, and the building is reoccupied after final inspections.
What helps us help you
- The fire department's incident or report number
- Your claim number and adjuster contact
- Any instructions from the fire investigator about the scene
- Building drawings, if you have them
- Which areas you need back first
- The restoration company's contact, if one is already hired
Part of our emergency repairs work.
Questions about commercial fire damage repair
When can we get back into the building?
When the fire department releases it. Even then, some areas may stay closed until an engineer has looked at the structure and the utilities are safe.
Can damaged materials be thrown out right away?
Wait until the fire investigator and your insurer say they can go, and photograph everything first. Removing materials too early can cause problems with the claim.
Do you clean smoke damage?
No. Smoke and soot cleaning, odor treatment and contents cleaning are done by a restoration company. We demolish what cannot be saved and rebuild.
Why does so much have to come out when the fire was small?
Smoke and hot gases travel through ceiling spaces and ductwork, and the water used to put the fire out soaks walls and insulation well beyond the burned area.
Will we have to bring the building up to current code?
The rebuilt areas usually have to meet the code in force now. The building department decides, and we raise it early so it can go to your insurer.
When does the sprinkler system get restored?
As early as it can be, because the building may need a fire watch while the system is impaired; the fire marshal or your insurer decides. A licensed fire protection contractor repairs it and it is inspected before reoccupancy.
Other emergency repairs
Part of emergency repairs. All services.
- Emergency board-upBroken storefronts and doors secured, then glass and frames replaced
- Sprinkler discharge damageA broken head or pipe: repairs below and the system back in service
- Commercial water damage repairBurst pipes and supply lines: rebuilt once the space is dried
- Emergency repairsVehicle impacts, roof leaks, water and storm damage
Damage to a commercial building?
For immediate danger call 911 first. For building damage, phone us; do not rely on a web form. Call 616-323-0292 or email info@grandrapidsconstruction.com.